Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 212

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 573 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P711 – Zustand Digital e Ausgäng e [SK 2xxE, SK 2xxE-FDS] @ 2\mod_1346932206390_14638.doc x @ 43556 @ @ 1
State of relays
P711
(state of digital outputs)
00000 ... 11111 Indicates the actual status of the digital outputs of the variable frequency drive.
(bin)
or
Bit 0 = Digital output 1
Bit 1 = Mechanical brake
00 ... FF
(hex)
Bit 2 = Digital output 2
Bit 3 = reserved
Pos : 574 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P711 – Zustand Digital e Ausgäng e_T eil2/2 [SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 9\mod_1448448278913_14638.doc x @ 266831 @ @ 1
Minimum value
Maximum value
Simple Box: The binary bits are converted to a hexadecimal value and displayed.
Parameter Box: The bits are displayed increasing from right to left (binary).
Pos : 575 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P714 – Betriebs dauer @ 0\mod_1328172684685_14638.doc x @ 15118 @ @ 1
Operating time
P714
(operating time )
0.10 ... ___ h This parameter shows the time for which the VFD was connected to the line voltage and was
ready for operation.
Pos : 576 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P715 – Freigabedauer @ 0\mod_1328172731474_14638.doc x @ 15119 @ @ 1
Running time
P715
(enable period)
0.00 ... ___ h This parameter shows the time for which the VFD was enabled and supplied current to the output.
Pos : 577 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P716 – Aktuelle Frequenz @ 0\mod_1328172775215_14638.doc x @ 15120 @ @ 1
Current frequency
P716
(present frequency)
-400.0 ... 400.0 Hz Displays the present output frequency.
Pos : 578 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P717 – Aktuelle Drehz ahl @ 0\mod_1328172889966_14638.doc x @ 15121 @ @ 1
Current speed
P717
(present speed)
-9999 ... 9999 rpm Displays the present motor speed calculated by the VFD.
Pos : 579 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P718 – Aktuelle Sollfreq uenz @ 0\mod_1328172931732_14638.doc x @ 15122 @ @ 1
P718
[-01]
Current setpoint frequency
...
(present setpoint frequency)
[-03]
-400.0 ... 400.0 Hz
Displays the frequency specified by the setpoint (please see chapter 8.1 "Setpoint processing").
[-01] = present setpoint frequency from the setpoint source
[-02] = present setpoint frequency after processing in the VFD status machine
[-03] = present setpoint frequency after frequency ramp
Pos : 580 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
212
Bit 4 = Digital output 1, IO extension 1
Bit 5 = Digital output 2, IO extension 1
Bit 6 = Digital output 1, IO extension 2
Bit 7 = Digital output 2, IO extension 2
Bits 7-4
Bits 3-0
0000
0
1111
F
0000 Binary
0 hex
1111 Binary
F hex
BU 0200 en-US-3118