Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 138

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
60 =
61 =
62 =
63 =
65 =
Pos : 298 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P000- P099/Parameter P002 – Displ ay-F aktor @ 0\mod_1327573818457_14638.doc x @ 14893 @ @ 1
Display factor
P002
(display factor)
0.01 ... 999.99
The operating value selected in parameter P001 >Selection of operating value display< is multiplied
with the scaling factor and displayed in P000 >Status display<.
{ 1.00 }
It is therefore possible to display system-specific operating values such as the flow rate.
Pos : 299 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P000- P099/Parameter P003 – Super vis or-Code [SK 1x0E, SK 2xxE, SK 2xxE-FD S] @ 2\mod_1346931544673_14638.doc x @ 42131 @ @ 1
P003 Supervisor code
(supervisor code)
0 = The supervisor parameters and groups P3xx/P6xx are not visible, otherwise all.
0 ... 9999
{ 1 } 1 = All parameters are visible, except groups P3xx and P6xx.
2 = All parameters are visible, except group P6xx.
3 = All parameters are visible.
4 = ... 9999, only parameters P001 and P003 are visible.
If parameterization is carried out with the NORDCON software, settings 4 ... 9999 behave like
setting 0. Settings 1 and 2 behave like setting 3.
Pos : 300 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
138
Stator R ID
Rotor R ID
Stator stray L ID
Stator L ID
Information
Stator resistance determined by means of measurement (P220)
Rotor resistance determined by measurement ((P220) function 2)
Leakage inductance determined by measurement ((P220) function
2)
Inductance determined by measurement ((P220) function 2)
Reserved
Display via NORDCON
S
BU 0200 en-US-3118