Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 204

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 540 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P500- P599/Parameter P553 – PLC Soll werte [SK 1x0E, SK 2xxE, SK 5xxE] @ 9\mod_1448356543219_14638.doc x @ 266178 @ @ 1
P553
[-01]
PLC set values
...
(PLC setpoints)
[-05]
0 ... 57 The PLC setpoints are assigned with a function in this parameter. The settings only apply for
main setpoints and with active PLC actuation ((P350) = "On") and ((P351) = "0" or "1").
all = { 0 }
[-01] = Bus-set value 1
Possible values which can be set:
10 = Servo-mode Torque
11 = Pre-tension Torque
12 = Reserved
13 = Multiplication
14 = Current value process control
15 = Nom. Val. Process ctrl.
16 = Add. process control
Pos : 541 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
204
0 = Off
1 = Setpoint frequency
2 = Torque current limit
3 = PID current frequency
4 = Frequency addition
5 = Frequency subtraction
6 = Current limit
7 = Maximum frequency
8 = PID ltd. Current freq.
9 = PID suprvsd. Cur. freq.
S
... [-05] = Bus-set value 5
17 = BusIO In Bits 0-7
18 = Curve control
19 = Set relays
20 = Set analog out
21 = Setpoint position LowWord
22 = Setpoint pos. HighWord
23 = Setpoint pos. Inc. LowWword
24 = Setpoint pos. Inc. HighWord
46 = Setval. torque p. reg.
47 = Ratio gearing
48 = Motor temperature
49 = Ramp time
53 = d-corr. F process
54 = d-corr. Torque
55 = d-corr. F+Torque
56 = Acceleration time
57 = Deceleration time
BU 0200 en-US-3118
P