Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 217

Pos : 609 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P741 – Pr ozessdaten Bus Out [SK 1x0E, SK 2xxE, SK 500...535E, SK 2xxE-FDS] @ 0\mod_1328177890266_14638.doc x @ 15148 @ @ 1
P741
[-01]
PZD bus Out
...
(Process data Bus Out)
[-19]
0000 ... FFFF (hex) This
information about the actual
status word and the actual
values that are transferred
via the bus systems.
Standardization:
( Section 8.9
"Standardization
setpoint/target values")
Pos : 610 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P742 – Datenbankversion @ 0\mod_1328178021821_14638.doc x @ 15150 @ @ 1
Data base version
P742
(database version)
0 ... 9999 Displays the internal database version of the VFD.
Pos : 611 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P743 – U mrichtertyp @ 0\mod_1328178080214_14638.doc x @ 15151 @ @ 1
Inverter ID
P743
(inverter type)
0.00 ... 250.00
Displays the VFD power in kW, e.g. "1.50" ⇒ VFD with 1.5 kW nominal power.
Pos : 612 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
BU 0200 en-US-3118
parameter provides
[-01] = Status word
[-02] = actual value 1 (P543)
[-03] = actual value 2 (...)
[-04] = actual value 3 (...)
[-05] = res. Stat. OutBit P481
of
[-06 ] = Parameter data Out 1
[-07 ] = Parameter data Out 2
[-08 ] = Parameter data Out 3
[-09 ] = Parameter data Out 4
[-10 ] = Parameter data Out 5
[-11] = Actual value 1 leadfunct.
[-12] = Actual value 2 leadfunct.
[-13] = Actual value 3 leadfunct.
[-14] = Statusword PLC
[-15] = Actual value 1 PLC
...
[-19] = PLC 5 actual value
5 Parameter
S
Status word, source from
P509.
Actual values
The displayed value depicts
all Bus OUT Bit sources linked
with an "OR".
Data during parameter
transfer.
Actual value of leadfunction
P502/P503.
Status word + actual values
on PLC
S
217