Indicator; Indicators On The Rectifier Module Of The Eps30-4815Af Power System - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
The EPS30-4815AF power system can be configured with two rectifier modules, which are
connected in parallel for output.
Table 6-2
power system and the maximum output current.
Table 6-2 Mapping between the quantity of rectifier modules of the EPS30-4815AF power
system and the maximum output current
Quantity of Rectifier Modules
1
2

Indicator

Table 6-3
Table 6-3 Indicators on the rectifier module of the EPS30-4815AF power system
Indicator
RUN
ALM
FAULT
Table 6-4
system.
Issue 01 (2012-08-17)
shows the mapping between the quantity of rectifier modules in the EPS30-4815AF
describes the indicators on the rectifier module of the EPS30-4815AF power system.
Status
Steady green
Off
Steady yellow
Blinking yellow
Off
Steady red
Off
describes the indicators on the monitoring module of the EPS30-4815AF power
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 EPS30-4815AF Monitoring Solution
Maximum Output Current
15 A
30 A
Description
The rectifier module functions properly.
This indicator is off when the red indicator is
on or the yellow indicator is on (not caused by
output overcurrent).
The ALM indicator of the rectifier module is
valid when PS-off, OTP, and primary
protection are valid, or when overcurrent
occurs.
The communication of the rectifier module is
interrupted.
The rectifier module functions properly.
The FAULT indicator of the rectifier module
is valid when PS-enable and Vo-OV are valid,
or when fan fault, no output, or output short
circuit occurs.
The rectifier module functions properly.
60