Table of Contents
Advertisement
Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
There is a scald warning label attached on the device, warning you not to touch the device after
the device has been operating for a long time.
1.2 Indicator Description
The AP8030DN and AP8130DN provides multiple indicators: SYS indicator, Link/ACT
indicator, and Wireless indicator. The following tables describe indicators on the AP8030DN
and AP8130DN.
SYS indicator
Table 1-2 Descriptions about the SYS indicator
Type
Default
status after
power-on
Software
startup
status
Running
status
Issue 02 (2014-12-05)
CAUTION
NOTE
l Indicator colors may vary slightly at different temperature.
l After a Fit AP is powered on, you can run the led off command on the AC to turn off all AP indicators.
To restore the indicators to normal working status, run the led on command. Indicators on a Fat AP
cannot be turned off using the led off command.
GE1
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Description
Steady on
The AP is just powered on and the software is not
started yet.
Steady on
After the system is reset and starts uploading the
after
software, the indicator blinks green once. Until the
blinking
software is uploaded and started, the indicator
once
remains steady green.
Blinking
l The system is running properly, the Ethernet
once every
connection is normal, and STAs are associated
2s (0.5 Hz)
with the AP.
l The system enters the Uboot CLI.
1 AP8130DN & AP8030DN Overview
4
Hide quick links:
Advertisement
Table of Contents
