Huawei UA5000 Manual page 82

UA5000 Universal Access Unit
Environment Monitoring
Item
External
extended
digital
parameters
Configuration Process
The monitoring parameters can be reported to the control board and the service processing board
only when the data for the EPS30-4815AF is configured correctly in the system.
Figure 6-8
the configuration.
Issue 01 (2012-08-17)
Data Plan for the
F01E400 Cabinet
Digital parameter ID: 1
Valid level of digital
parameter 1: low level
Digital parameter ID: 3
Valid level of digital
parameter 2: low level
NOTE
The preceding data is configured according to the actual requirements. When the actually planned value
of a parameter is the same as the default value, it is not necessary to configure the parameter.
shows the configuration process, and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 EPS30-4815AF Monitoring Solution
Remarks
This digital parameter is set according to the
actual requirements. The monitoring digital
parameter of the fan tray is set here to monitor the
fan tray. When the fan tray is faulty, the host
reports an alarm.
When the low level represents the valid level, the
host does not report an alarm in the case of low
level.
This digital parameter is set according to the
actual requirements. The monitoring digital
parameter of the surge protector is set here to
monitor the surge protector. When the surge
protector is faulty, the host reports an alarm.
When the low level represents the valid level, the
host does not report an alarm in the case of low
level.
Table 6-14 lists the commands used during
76