Settings Of H303Esc S1, S2, S3, S8, And S11; Settings Of H303Esc S11 - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
DIP Switch
S7-4
Jumpers S1, S2, S3, S8, and S10 are used to set the type of the serial port, and their settings are
described in
Table 3-6 Settings of H303ESC S1, S2, S3, S8, and S11
Jumper
S1
S2
S3, S8,
S10
S11 is used to set whether the running status LED on the front panel is valid, and the settings
are as described in
Table 3-7 Settings of H303ESC S11
Jumper
S11
Issue 01 (2012-08-17)
Setting Meaning
ON The reporting rate of the serial port is 19200
bit/s
OFF The reporting rate of the serial port is 9600
bit/s
Table 3-6.
Setting
Pins 1-2 connected
Pins 2-3 connected
Pins 1-2 connected
Pins 2-3 connected
Pins 1-2 of S3, S8, and S10
connected
Pins 2-3 of S3 connected;
pins 1-2 of S8 and S10
connected
Pins 2-3 of S8 and S10
connected, S3 connected in
any way
Table 3-7.
Setting Meaning
Pins 1-2 The running status LED is valid
connected
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 H303ESC Monitoring Solution
Meaning
The serial port SIO1 is an
RS-232 port
The serial port SIO1 is an
RS-422 port
The serial port SIO2 is an
RS-232 port
The serial port SIO2 is an
RS-422 port
The serial port SIO3 is an
RS-232 port
The serial port SIO3 is an
RS-422 port
The serial port SIO3 is an
RS-485 port
Default
Setting
ON
Default
Setting
Pins 2-3
connected
Pins 2-3
connected
Pins 1-2 of all
jumpers
connected
Default
Setting
Pins 1-2
connected
11