Huawei UA5000 Manual page 37

UA5000 Universal Access Unit
Environment Monitoring
Cable
-48 V power cable of
the H304ESC
Test and alarm cable
Test and alarm
subtending cable
Test and alarm
subtending cable
Test and alarm
subtending cable
Door status sensor
connecting cable
Figure 4-4
configured with the H-type PDU.
cable connection diagram, check whether the connections from each sensor to the H304ESC
board and from the H304ESC board to the control system are correct.
Issue 01 (2012-08-17)
One End Connects to...
No. Position
2.1 Power output
terminal on the C-
2.2
type PDU
3 STACK OUT port on
the HWCF transfer
board of the HABD
(A)
4 STACK OUT port on
the HWTF transfer
board of the HABF
(B) shelf
5 STACK OUT port on
the HWTF transfer
board of the HABD
(C) shelf
6 STACK OUT port on
the HWTF transfer
board of the HABF
(D) shelf
7 Door status sensor
shows the connections of environment monitoring cables in the F02AF cabinet
Table 4-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 H304ESC Monitoring Solution
The Other End Connects to...
No. Position
1.4 JTD4 port of the H304ESC
1.5 JTD5 port of the H304ESC
1.6 JTD6 port of the H304ESC
2 -48 VDC power port of the
H304ESC
3.1 STACK IN port on the
HWTF transfer board of the
HABF(B)
3.2 JTD7 port of the H304ESC
3.3 RSP/PV8 port of the
H304ESC
3.4 SIO2 port of the H304ESC
4.1 STACK IN port on the
HWTF transfer board of the
HABD(C) shelf
4.2 JTD8 port of the H304ESC
5.1 STACK IN port on the
HWTF transfer board of the
HABF(D) shelf
5.2 JTD9 port of the H304ESC
6 JTD10 port of the
H304ESC
7 JTM1 terminal of the
H304ESC
describes the cable connections. By referring to the
31