AP6010DN-AGN Wireless LAN Access Point Quick Start Guide HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a potentially hazardous situation, which if not avoided, could CAUTION result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important NOTE points of the main text.
AP6010DN-AGN Quick Start Guide Please download the detailed product documents from "http://support.huawei.com/support/". The dEtaIled path is as follows: Technical Support->Documentation->Access Network -> WLAN ->WLAN -> Product Documentation ->AP6010DN. Before performing Installation, confirm that the installation accessories and tools are available.
Installing the AP Select an appropriate installation position and leave 20 cm space above and around the device for cooling air circulation. AP6010DN dimensions (unit: mm) without a backplane support Recommended AP6010DN installation space (unit: mm) The AP6010DN can be installed onto a workbench or mounted against a wall. In addition, the AP6010DN can be mounted to a T-rail and mounted against the ceiling.
Page 6
Installing the AP Ceiling-mount the AP6010DN using the sheetmetal wall-mounting bracket: 1. Remove the ceiling, determine locations of mounting holes based on the distance between two installation holes, use the hammer drill to drill holes, and fix the wall-mounting bracket to the ceiling. Adjustable buckle Ceiling...
Connecting Cables Connect the network cable to the AP Description Item ● The AP6010DN supports PoE power supply and DC power supply. ● When both the PoE power supply and DC power supply are available, the DC power Power adapter 12 V supply is used.
Power-on NOTE Power on the AP6010DN and check the indicator status to determine the System running status. Type Frequency Description Color UBOOT: Default status Green Steady on The AP is just powered on. The system is running properly, the Ethernet connection is 0.5 Hz correct,and STAs are associated with the AP.
Logging In to the Router After an AP is powered on, you can log in to the AP using the following methods. 1. Logging In to the AP Through the Console Port This section describes how to log in to the AP through the console port. After logging in to the AP, you can configure the AP using commands.
Page 10
Logging In to the Router Step 3 Select the serial port used on the PC and click OK, as shown in Figure 1-3. Figure 1-3 Selecting the connected port Step 4 Click Restore Defaults, select 9600 bit/s from the Bits per second drop-down list box, and click OK, as shown in Figure 1-4.
Page 11
Logging In to the Router 2. Logging In to the AP Using Telnet This section describes how to log in to the AP using Telnet. After logging in to the AP, you can configure the AP using Commands. Procedure Step 1 Connect a PC to the uplink port of the AP with a network cable.
Page 12
AP Local Configuration WLAN services parameters of an AP are configured on the AC that is connected To the AP, and then delivered to the AP. The following parameters are configured on the AP through Telnet or the console port. 1.
Page 13
Enterprise AP (if-ethernet) # 3. Configure a user name and password for going online in PPPoE mode. By default, the user name and password are both wlan@huawei and the password type is simple. Enterprise AP(if-ethernet) # user admin password simple admin //Set the user name and password to admin.
Page 14
AP Local Configuration 3. Configuring WDS This section describes how to configure WDS parameters on an AP. ● Introduction to WDS WDS enables multiple AP6010DNs to establish wireless links to connect two or more wired or wireless LANs. WDS- enabled AP6010DNs can switch data packets between the LANs. WDS facilitates network deployment, and device installation, and allows flexible networking.
Declaration on Hazardous Substances in Electronic Information Products Hazardous Substances Part Cr6+ PBDE Mechanical part Board/circuit module Signal cable Cable connector Power adapter Auxiliary equipment O: Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the SJ/T 11363-2006 standard.
In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice: 1. The defects are caused by improper handling in transportation and assembly. 2. The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner.
Page 17
HUAWEI TECHNOLOGIES CO., LTD . Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com Part Number: 31505361 Issue: 01...