Indicator Description - Huawei AP7052DN Hardware Installation And Maintenance Manual

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide

1.2 Indicator Description

The AP7052DN and AP7152DN provide only a single indicator, as shown in Figure 1-1.
Figure 1-1 Indicator
Table 1-3 Description about the single indicator
Type
Default
status
after
power-on
Software
startup
status
Running
status
Issue 01 (2017-12-29)
 The AP supports the following power supply modes: PoE power supply and DC power supply.
 When the AP uses the DC power supply, use a power adapter for power supply; otherwise, the AP
may be damaged.
 For power adapter models, see 5.9 Power Adaptation Solution.
 The indicator is located inside the panel, which turns on after the AP is powered on.
 Indicator colors may vary slightly at different temperature.
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The AP is just powered on and the software is not
started yet.
Steady on After the system is reset and starts uploading the
after software, the indicator blinks green once. Until the
blinking software is uploaded and started, the indicator
once remains steady green.
Blinking  The system is running properly, the Ethernet
once connection is normal, and STAs are associated
with the AP.
every 2s
(0.5 Hz)
 The system enters the Uboot CLI.
Blinking The system is running properly, the Ethernet
1 Product Overview
3