Configuring The Environment Monitoring Parameters Of The Eps30-4815Af - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
Cable
Monitoring cable of the Door
status sensor
Monitoring cable of the
temperature and humidity sensor
Monitoring cable
Test and alarm cable
6.4 Configuring the Environment Monitoring Parameters of
the EPS30-4815AF
This topic describes how to configure the environment monitoring parameters of the
EPS30-4815AF through the CLI.
Mapping Between Monitoring Parameters and Device Ports
Table 6-12
the ports on the sensor transfer box.
Table 6-12 Mapping between the monitoring parameters displayed on the host and the ports on
the sensor transfer box
Monitoring Parameter
Displayed on the Host
Digital 0
Digital 1
Digital 2
Digital 3
Digital 4
Issue 01 (2012-08-17)
describes the mapping between the monitoring parameters displayed on the host and
Device Port
JTD1
JTD2
JTD3
JTD4
JTD5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 EPS30-4815AF Monitoring Solution
Connect One End of the
Cable to...
JTM1 terminal of the
sensor transfer box
TEM-HU terminal of the
sensor transfer box
(1): J1 terminal of the
sensor transfer box
(3): Communication port
on the PSTF transfer board
of the HABM
Application in the M200 Cabinet
Not connected by default, used to add
a user-defined monitoring digital
parameter
Not connected by default, used to add
a user-defined monitoring digital
parameter
Not connected by default, used to add
a user-defined monitoring digital
parameter
Not connected by default, used to add
a user-defined monitoring digital
parameter
Not connected by default, used to add
a user-defined monitoring digital
parameter
Connect the Other End
of the Cable to...
Door status sensor
Temperature and humidity
sensor
(2): EPS30-4815AF
(4): RS485/RS232 ports on
the monitoring unit of the
EPS30-4815AF
70