Huawei UA5000 Manual page 115

UA5000 Universal Access Unit
Environment Monitoring
Monito
ring
Parame
ter
Displa
yed on
the
Host
Wiring
alarm
Battery
Tem
environ
ment
Tem/
environ
ment
Hum
Data Plan
The data plan of the EPS75-4815AF in the F02A cabinet is the same as that in F02AF, F01D200,
F01D500, and F01D1000 cabinets. In this topic, the application in the F01D500 cabinet is
considered as an example.
parameters of the EPS75-4815AF.
Table 7-20 Data plan for configuring the monitoring parameters of the EPS75-4815AF
Item
EMU
Issue 01 (2012-08-17)
Devic Applicatio
e Port n in the
F02A
Cabinet
JTP1 MDF
BAT_ Battery
WE temperature
sensor
TEM- Not
HU connected by
default.
NOTE
Before adding a user-defined analog or monitoring digital parameter, make sure that the port corresponding
to this parameter is properly connected to an environment monitoring cable.
Data Plan for the
F01D500 Cabinet
Type: POWER4875L
SN: 0
Subnode ID: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Application
in the
F02AF
Cabinet
MDF
Battery
temperature
sensor
Not
connected by
default.
Table 7-21 provides the data plan for configuring the monitoring
Remarks
During the configuration of the EPS75-4815AF,
the type of the EPS75-4815AF is selected as
POWER4875L.
-
The subnode ID must be the same as the subnode
setting of the corresponding DIP switches on the
EMU, but the subnode ID must be different from
IDs of the other subnodes on the same bus.
7 EPS75-4815AF Monitoring Solution
Applicati Applicati
on in the on in the
F01D200 F01D500
Cabinet Cabinet
MDF MDF
Battery Battery
temperatur temperatur
e sensor e sensor
Temperatu Temperatu
re and re and
humidity humidity
sensor sensor
Applicati
on in the
F01D1000
Cabinet
MDF
Battery
temperatur
e sensor
Temperatu
re and
humidity
sensor
109