Installing The Mdf Sensor - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
Figure 10-27 Connections of the water sensor
Figure 10-28 Connections of the water sensor
----End

10.2.7 Installing the MDF Sensor

This section describes how to install the MDF sensor.
Context
The MDF contains the cable side terminal blocks, exchange side terminal blocks, and protective
units. To detect the MDF status is to detect the status of the protective units.
Procedure
Step 1 Connect the sensor cable.
Issue 01 (2012-08-17)
Cable: 04025177 (including water sensor)
Figure 10-29
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Main label
W
shows the connections of the MDF.
10 Sensors
Sensor transfor box
1. +12 VDC
2. Signal input
3. GND
X1
2. not used
WATER
201