Huawei UA5000 Manual page 63

UA5000 Universal Access Unit
Environment Monitoring
5.
6.
7.
8.
Issue 01 (2012-08-17)
huawei(config-if-MiniESC-0)#esc analog 2 alarm-upper-limit 80 alarm-lower-
limit 0 name Humidity sensor-type 0:voltage analog-alarm 2 unit %RH
Configure the digital parameters.
huawei(config-if-MiniESC-0)#esc digital 9 available-level low-level name szl9
digital-alarm 7
Query the default configuration of the analog and digital parameters.
huawei(config-if-MiniESC-0)#display esc environment info
EMU ID: 0
FAN control mode :Auto
---------------------------Analog environment info--------------------------
ID Name
0 Temperature
1 Input_-48v_0
2 Humidity
3 -
---------------------------Digital environment
info---------------------------
ID Name
0 Wiring
2 -
4 -
6 -
8 -
----------------------------------------------------------------------------
NOTE
The door status alarm "Door0" is generated because the door is open.
Save the data.
huawei(config-if-MiniESC-0)#quit
huawei(config)#save
Close all the cabinet doors. Query the environment information again, and confirm that no
door status alarm is generated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ESC environment state
FAN run state: Open
State Value AlmUpper
Normal 29.00 50
Normal 53.906 75
Normal -128.00 127
Normal -128.00 127
State Value |ID Name
Normal 1 |1 Door0
Normal 1 |3 -
Normal 1 |5 -
Normal 1 |7 -
Normal 1 |9 szl9
5 ESCM Monitoring Solution
AlmLower Unit
10 C
45 V
-128 -
-128 -
State Value
Alarm 1
Normal 1
Normal 1
Normal 1
Normal 0
57