Huawei UA5000 Manual page 43

UA5000 Universal Access Unit
Environment Monitoring
Item
Digital
parameters
Issue 01 (2012-08-17)
Data
Upper alarm threshold of
analog parameter 0: 50
Lower alarm threshold of
analog parameter 0: 5
Analog parameter ID: 4
Upper alarm threshold of
analog parameter 4: 75 V
Lower alarm threshold of
analog parameter 4: 45 V
Analog parameter ID: 5
Upper alarm threshold of
analog parameter 5: 80
Lower alarm threshold of
analog parameter 5: 0
Name of analog parameter
5: Humidity
Alarm ID of analog
parameter 5: 2
Unit of analog parameter 5:
% RH
Sensor type of analog
parameter 5: voltage type
Digital parameter ID: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 H304ESC Monitoring Solution
Remarks
When the ambient temperature of the device
is equal to or higher than 50°C, the host
reports an alarm.
Default: 55°C.
When the ambient temperature of the device
is equal to or lower than 5°C, the host reports
an alarm.
Default: 5°C.
This analog parameter is set according to the
actual requirements. The built-in analog
parameter is set here to monitor the voltage
of the device.
When the voltage of the device is equal to or
higher than -75 V, the host reports an alarm.
Default: 75 V.
When the voltage of the device is equal to or
lower than -45 V, the host reports an alarm.
Default: 45 V.
The user-defined humidity monitoring
analog parameter is added to monitor the
humidity of the device.
When the humidity of the device is equal to
or higher than 80% RH, the host reports an
alarm.
When the humidity of the device is equal to
or lower than 0% RH, the host reports an
alarm.
-
The user-defined humidity alarm of the
system is used.
-
-
The monitoring digital parameter of the
MDF sensor is set here to monitor the MDF
status. When the MDF is faulty, the host
reports an alarm.
Allocated by default (unable to be changed
by the user).
37