Huawei UA5000 Manual page 59

UA5000 Universal Access Unit
Environment Monitoring
Data Plan
Table 5-8
Table 5-8 Data plan for configuring the ESCM
Item
EMU
Analog
parameters
Issue 01 (2012-08-17)
provides the data plan for configuring the ESCM.
Data
Type: ESCM
SN: 0
Subnode ID: 30
Analog parameter ID: 0
Upper alarm threshold of
analog parameter 0: 50
Lower alarm threshold of
analog parameter 0: 10
Analog parameter ID: 1
Upper alarm threshold of
analog parameter 1: 75 V
Lower alarm threshold of
analog parameter 1: 45 V
Analog parameter ID: 2
Upper alarm threshold of
analog parameter 2: 80
Lower alarm threshold of
analog parameter 2: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 ESCM Monitoring Solution
Remarks
ESCM is displayed as ESCM on the CLI.
-
The serial port of the ESCM is an RS232
serial port, and the subnode ID must be set to
30.
This analog parameter is set according to the
actual requirements. The built-in analog
parameter is set here to monitor the ambient
temperature of the device.
When the ambient temperature of the device
is equal to or higher than 50°C, the host
reports an alarm.
Default: 55°C.
When the ambient temperature of the device
is equal to or lower than 10°C, the host
reports an alarm.
Default: 5°C.
This analog parameter is set according to the
actual requirements. The built-in analog
parameter is set here to monitor the voltage
of the device.
When the voltage of the device is equal to or
lower than -75V, the host reports an alarm.
Default: -75V.
When the voltage of the device is equal to or
lower than -45 V, the host reports an alarm.
Default: -45 V.
The user-defined humidity monitoring
analog parameter is added to monitor the
humidity of the device.
When the humidity of the device is equal to
or lower than 80% RH, the host reports an
alarm.
When the humidity of the device is equal to
or lower than 0% RH, the host reports an
alarm.
53