Configuring The Environment Monitoring Parameters Of The Etp4890 - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
8.4 Configuring the Environment Monitoring Parameters of
the ETP4890
This topic describes how to configure the environment monitoring parameters of the ETP4890
through the CLI.
Mapping Between Monitoring Parameters and Device Ports
Table 8-13
transfer box.
Table 8-13 Mapping between the monitoring parameters displayed on the host and the ports on
the sensor transfer box
Monitoring
Parameter
Displayed
on the Host
Digital 0
Digital 1
Digital 2
Digital 3
Digital 4
Digital 5
Digital 6
Door alarm
Issue 01 (2012-08-17)
describes the mapping between the monitoring parameters displayed on the sensor
Device Application in
Port the F01D200
Cabinet
JTD1 Fan monitoring
board of the
HABD shelf
JTD2 Not connected by
default, used to
add a user-defined
monitoring digital
parameter
JTD3 Not connected by
default, used to
add a user-defined
monitoring digital
parameter
JTD4 surge protector
SMOKE Smoke sensor
JTD6 Heat exchanger
JTD7 Door status sensor
of the MDF
compartment
JTM1 Door status
sensors of the
device
compartment and
heat exchanger
compartment
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 ETP4890 Monitoring Solution
Application in Application in
the F01D500 the F01D1000
Cabinet Cabinet
Fan monitoring Fan monitoring
board of the board of the
HABD shelf HABD shelf
Fan monitoring Fan monitoring
board of the HABF board of the HABF
shelf shelf
Not connected by Fan monitoring
default, used to board of the
add a user-defined HABD shelf in the
monitoring digital right device
parameter compartment
surge protector surge protector
Smoke sensor Smoke sensor
Heat exchanger Heat exchanger
Door status sensor Door status sensor
of the MDF of the MDF
compartment compartment
Door status Door status
sensors of the sensors of the
device device
compartment and compartment and
heat exchanger heat exchanger
compartment compartment
138