Parameters Of The Hx03E-22Sh Heat Exchanger; Sensors Selected By Users; Specifications Of The Temperature And Humidity Sensor - Huawei UA5000 Manual

UA5000 Universal Access Unit
Environment Monitoring
Silk
Screen
Alarmin
g
Parameters
Table 10-13
Table 10-13 Parameters of the HX03E-22SH heat exchanger
Item
Dimensions (W x D x H)
Weight
Heat exchange performance
Typical Power Consumption

10.1.12 Sensors Selected by Users

This topic provides the specifications of the temperature and humidity sensor, water sensor, door
status sensor, and smoke sensor that are selected by users.

Specifications of the Temperature and Humidity Sensor

The temperature and humidity sensor selected by users must meet the following specifications.
l
l
l
l
l
Figure 10-17
Issue 01 (2012-08-17)
Function
LED that
indicates the
alarm status
lists the parameters of the HX03E-22SH heat exchanger.
Work voltage: 24 V
Output type of the temperature signal: current type (4 mA to 20 mA)
Output type of the humidity signal: current type (4 mA to 20 mA)
Temperature measurement range: -20°C to +80°C
Humidity measurement range: 0% RH to 100% RH
shows the relation between the temperature and output current.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Green: on for 0.5s and off for
0.5s repeatedly
Green: off
Red: on
Red: off
Specifications
456.2 mm x 242.2 mm x 1308.2 mm
36 kg
180 W/K
135 W
10 Sensors
Meaning
The heat exchanger is running
in the normal state, but the
communication with the
system is interrupted.
No power supply
A fault is generated.
No alarm is generated.
189