VISION TOUCH WELLNESS
CHAPTER 10: WEB SERVER
INSTALLATION
10.1
he Web configuration of the Vision Touch Wellness depends on the type of connection.
- Direct connection to the PC
The network card of the computer must be configured in order to have the assignment of
the DHCP address activated. In this case, the Vision Touch Wellness and the computer,
finding no DHCP server, will take the default IP addresses previewed for the class of
addressing 169.254.xxx.xxx. In order to connect to the device, it will be necessary to open
up a browser page and digit in the address bar the following order:
http://hostname/
where
hostname
=
unique
identifier linked to the serial number present in the
info page (Take look at "Info Page", chap. 8.3.7).
or
http://169.254.254.1/
(IP default address of the Vision Touch)
USER AND MAINTENANCE MANUAL
Pag. 77
Rel 01-19
Need help?
Do you have a question about the Vision Touch Wellness and is the answer not in the manual?