Pego Vision Touch Wellness User And Maintenance Manual page 72

VISION TOUCH WELLNESS
EnI MASTER board initialisation error.
Configuration Error
Ec1
Room Temperature probe
Configuration Error
Ec3
Room Humidity probe
Ag1 General alarm 1 from digital input
Ag2 General alarm 2 from digital input
Ag3 General alarm 3 from digital input
Digital input configuration error during an import or
Edi
update configuration.
Digital output configuration error during an import or
Edo
update configuration.
Analogue input configuration error during an import or
Eai
update configuration.
Analogue output configuration error during an import
Eao
or update configuration.
USER AND MAINTENANCE MANUAL
Pag. 72
 Check the connection between the
two units.
 Switch the Vision Touch off and on
again.
 If the problem persists, contact the
technical assistance service.
 Check the configuration of the
analogue inputs.
 Check the configuration of the
analogue inputs.
 Check enabling of humidity
management.
 Verify the digital input configured as
'Generic warning 1'
 Verify the digital input configured as
'Generic warning 2'
 Verify the digital input configured as
'Generic warning 3'
 Check the configuration of the digital
input.
 Reconfigure the input disabled.
 Check the configuration of the digital
output.
 Reconfigure the output disabled.
 Check the configuration of the
analogue input.
 Reconfigure the input disabled.
 Check the configuration of the
analogue output.
 Reconfigure the output disabled.
Rel 01-19