Home 1 - Temperature / Humidity Set Point Modification - Pego Vision Touch Wellness User And Maintenance Manual

VISION TOUCH WELLNESS
HOME 1 – Temperature/Humidity Set point Modification
6.2
"Set point edit" mode on Home 1 page:
Touch one of the adjustment dials on the screen (Temperature or humidity) for more than
three consecutive seconds.
Once you have entered the edit mode, it is possible to change the humidity and
temperature Set Points currently in use by rotating the Wheel clockwise to increase or anti-
clockwise to decrease the value of the Set Point to be modified. Otherwise you can press
the plus and minus buttons. Then confirm the new values by pressing the green "Confirm"
button or by pressing "Cancel" to go back to the display screen.
To exit this mode, you can also press the "Back" button or wait for the automatic exit after
one minute of inactivity.
USER AND MAINTENANCE MANUAL
Pag. 32 Rel 01-19