VISION TOUCH WELLNESS
ATTENTION: during the entire installation phase the controller must be kept powered
and the USB key must be left inserted. Failure to comply with this requirement could
entail PEGO S.r.l. having to restore the software.
The update finishes as soon as the controller goes back to the "HOME 1" screen; at this
point you can remove the USB key and resume normal use.
The new Software version can be checked in the "Parameters" > "Info" menu under
"Application Version".
Info
8.3.15
The "Info" menu contains information relating to the software version installed and other
information about the device. The menu can be accessed from the main Configuration
page ("Parameters" Button).
Info
USER AND MAINTENANCE MANUAL
Pag. 57
Rel 01-19
Need help?
Do you have a question about the Vision Touch Wellness and is the answer not in the manual?