CAP. 1 - Introduzione
CHAPTER 1: INTRODUCTION
1.1
DESCRIPTION:
The VISION TOUCH WELLNESS allows for advanced management of saunas, steam
rooms and Turkish baths.
The system consists of the 100N MASTER3 unit, on which all the electrical connections
are made, and the VISION TOUCH WEL control console, equipped with 7'' TFT display
with capacitive touch screen combined with a highly advanced software and a highly user
friendly interface that allows easy use.
APPLICATIONS:
-
Saunas.
-
Wet saunas.
Turkish bath (only with combined Easysteam humidifier).
-
TECHNICAL SPECIFICATIONS FOR WELLNESS:
Manual or automatic switch-on (by setting a single time or with weekly programmable
-
thermostat)
Drying cycle configurable at the end of the operating period (only ventilation or
-
ventilation and heating).
Maximum settable time of operation up to 12 hours.
-
Temperature regulation range: 0°C/+99°C.
-
Humidity regulation range: 0-100 R.H.%, with a maximum programmable value in
-
accordance with standard EN60335-2-53:2012.
-
Internal light control.
-
RGB light control (Chromotherapy, requires external controller).
For appliances for use in blocks of flats, hotels and similar locations, the
operating period of the sauna heater shall be limited to 12 h with a minimum rest
period of 6 h before any automatic restarting. For other appliances, the
operating period of the timer shall be limited to 6 h, automatic restarting not
being allowed (reference to standard EN60335-2-53:2012, section 22.103).
USER AND MAINTENANCE MANUAL
Pag. 5
GENERAL INFORMATION
VISION TOUCH WELLNESS
Rel 01-19
Need help?
Do you have a question about the Vision Touch Wellness and is the answer not in the manual?