Home 2 - Scheduled Switch-Off - Pego Vision Touch Wellness User And Maintenance Manual

6.6
If the programmable thermostat function is disabled (parameter EnC=0) and the
adjustment is on (standby), a switch-off delay can be set on the "Home 2" page.
"Switch-off delay edit" mode on the Home 2 page:
Touch any part of the Home 2 screen for more than three consecutive seconds.
Scheduled switch-off in:
Once the edit mode is accessed, the remaining time for switch-off can be changed. Then
confirm the new value by pressing the green "Confirm" button or by pressing "Cancel" to
go back to the display screen.
To exit this mode, you can also press the "Back" button or wait for the automatic exit after
one minute of inactivity.
Scheduled switch-off in:
USER AND MAINTENANCE MANUAL
Pag. 35
HOME 2 – Scheduled switch-off
VISION TOUCH WELLNESS
Rel 01-19