Home - Pego Vision Touch Wellness User And Maintenance Manual

VISION TOUCH WELLNESS
"Home 2" allows the scheduled switch-on to be configured; the graphics and management
depends on the value of the EnC parameter and the operating status.
If the programmable thermostat function is disabled (parameter EnC=0) and the
adjustment is off (standby), a switch-on time can be set on the "Home 2" page.
"Switch-on time edit" mode on the Home 2 page:
Touch any part of the Home 2 screen for more than three consecutive seconds.
Unscheduled switch-on
Once the edit mode is accessed, the scheduled switch-on time can be enabled and
changed. Then confirm the new value by pressing the green "Confirm" button or by
pressing "Cancel" to go back to the display screen.
To exit this mode, you can also press the "Back" button or wait for the automatic exit after
one minute of inactivity.
Unscheduled switch-on
USER AND MAINTENANCE MANUAL
Pag. 34

HOME 2

HOME 2 – Scheduled switch-on
Rel 01-19
6.4
6.5