Pego Vision Touch Wellness User And Maintenance Manual page 61

VISION TOUCH WELLNESS
- Digital outputs test
The "Digital outputs test" allows to manually force the digital outputs of the connected
100N MASTER3. Access to this menu put the control unit in "Stand by": the time progress
of an ongoing program is not altered but all output functions are disabled.
The function associated to each digital output can be set in "Parameters" => "Configure
I/O" => "Digital outputs".
Press to enable / disable a Output function
Connection
(can be set)
digital output terminals
USER AND MAINTENANCE MANUAL
Pag. 61
Rel 01-19