Pego Vision Touch Wellness User And Maintenance Manual page 44

VISION TOUCH WELLNESS
The air changes can be enabled with parameter EnA. When the operating time elapses air
change cycles can only be performed that only activate the ventilation or that activate the
ventilation and heating (controlled via the SrA parameter). The duration of the air change
is defined by parameter drA.
If the adjustment is off, an air change can be forced by pressing the "Ric. aria" (air change)
key.
The "Air change" menu can be accessed from the main Configuration page ("Parameters"
Button). The display of this item can be set in the "Password" sub-menu => "Configure
user level menu" and by selecting the "Air change" item (installer login required).
Air change
VARIABLES
drA Air change period.
SrA Air change temperature setpoint
"Configure WELLNESS" allows to select which functions of the WELLNESS control unit
are enabled; in particular, it allows the operating mode to be configured and the
management of the air and programmable thermostat to be enabled/disabled.
The "Configure WELLNESS" menu can be accessed from the main Configuration page
("Parameters" Button). The display of this item can be set in the "Password" sub-menu =>
"Configure user level menu" and by selecting the "Configure WELLNESS" item (installer
login required).
Configure WELLNESS
VARIABLES
Air change enabling
EnA
Enabling the programmable thermostat
EnC
mOd Functioning mode
USER AND MAINTENANCE MANUAL
Pag. 44
Air change
MEANING
Configure WELLNESS
MEANING
30,0 ÷ 99,0 °C
VALUES
0 = disabled
1 = enabled (ventilation only)
2 = enabled (ventilation + hot)
0 = disabled
1 = enabled
0 = sauna
1 = wet sauna
2 = turkish bath
Rel 01-19
8.3.2
VALUES DEFAULT
0 ÷ 120 min 45
40,0 °C
8.3.3
DEFAULT
0
0
0