Configure I/O - Pego Vision Touch Wellness User And Maintenance Manual

8.3.18
"Configure I/O" allows to set the function associated to each input/output of the connected
100N MASTER3.
The "Configure I/O" function is reserved to expert users.
Pego S.r.l. disclaims any liability for damage to the system
The "Configure I/O" menu can be accessed from the main Configuration page
("Parameters" Button). The display of this item can be set in the "Password" sub-menu =>
"Configure user level menu" and by selecting the "Configure I/O" item (installer login
required).

Configure I/O

Digital outputs
Digital inputs
Analogue outputs
Analogue inputs
USER AND MAINTENANCE MANUAL
Pag. 65
Configure I/O
due to improper use of this function.
VISION TOUCH WELLNESS
Rel 01-19