Warranty And Liability; Disposal Standards - Pilz PMCprimo C Operating Instructions Manual

Security
It is the company's responsibility only to employ personnel who:
Are familiar with the basic regulations concerning health and safety / accident preven-
}
tion
Have read and understood the information provided in this description under "Safety"
}
And have a good knowledge of the generic and specialist standards applicable to the
}
specific application.
3.2.2

Warranty and liability

All claims to warranty and liability will be rendered invalid if
The product was used contrary to the purpose for which it is intended
}
Damage can be attributed to not having followed the guidelines in the manual
}
Operating personnel are not suitably qualified
}
Any type of modification has been made (e.g. exchanging components on the PCB
}
boards, soldering work etc.).
3.2.3 Disposal
When decommissioning, please comply with local regulations regarding the disposal of
}
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.3 Standards
To use the device correctly you will need to have a good knowledge of the relevant stand-
ards and directives. The following standards are relevant:
EN 61131-1: Programmable controllers – Part 1: General information
}
EN 61131-2: Programmable controllers – Part 2: Equipment requirements and tests
}
EN 61131-3: Programmable controllers – Part 3: Programming languages
}
Please note this is not an exhaustive list of safety standards and directives.
Where standards are undated, the 2010-12 latest editions shall apply.
Operating instructions PMCprimo C
1002242-EN-03
13