Type Code - Pilz PMCprimo C Operating Instructions Manual

Overview
2.3

Type code

Always state when ordering
Order number
Fig.: Type code for PMCprimo C
Explanation of type code
Servo amplifier
}
Type of servo amplifier in which the PMCprimo C is installed
CPU
}
Clock frequency of processor
Hardware
}
–
–
Software
}
–
–
–
–
Operating instructions PMCprimo C
1002242-EN-03
PMCprimo C. _ / _ / _ / _
Servo amplifier
Without
1.3 GHz
Dynamic curve calculation
IEC 61131-3 programming
A: Two CANopen interfaces
B: One CANopen and one PROFIBUS DP Slave interface
2: Software options not enabled
3, 5, 7: Dynamic curve calculation enabled
The dynamic curve calculation is a calculation program for allocation tables. The al-
location table is defined through variables and scaling. The dynamic curve calcula-
tion reads in the variables and calculates an allocation table.
4-7: IEC 61231-3 programming enabled
PLC functionality is programmed with CoDeSys.
6, 7: Path interpolation enabled
PLC functionality and path interpolation
Type
C
Without
Path interpolation
Supply voltage
10