Internal Usb Device Options; Install An Internal Usb Device - HPE ProLiant MicroServer Gen10 User Manual

2. Verify that any switches or jumpers on the expansion board are set properly.
For more information, see the expansion board documentation.
3. Install the expansion board. Verify that the board is firmly seated in the slot.

Internal USB device options

The server has an internal USB 2.0 port that you can use to install internal USB devices such as:
• USB flash media devices for booting up from flash solutions or for data backup/redundancy.
• USB devices that are intended to be rarely removed such as a USB dongle for Bluetooth or Wi‑Fi support.

Install an internal USB device

Procedure
1. Power down the server on page 22.
2. Disconnect the power cord from the AC source, and then from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the chassis cover on page 26.
50 Internal USB device options
1
2
1
2