4 Replacement Procedures
4.23 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to figures 4-55 and 4-56.
1. Remove two mask seals at the bottom corners of the display assembly.
2. Remove two M2.5×6 flat-head screws.
NOTE: Support the display with your hand when you remove the screws.
Display mask
Figure 4-55 Removing the screws on the display mask (14.1" Model)
4-80
Mask seals
Satellite 1400/2400 Maintenance Manual (960-364/365)
4.23 Display Mask
M2.5 × 6 screws