Installing A Memory Module - Toshiba Satellite 1400 Series Maintenance Manual

4.3 Memory Modules

Installing a Memory Module

To install a memory module, make sure that the computer is in boot mode and powered off,
follow the steps below and refer to figures 4-8 and 4-9.
CAUTION: Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
1. Fit the memory module's connectors into the computer's connectors and press
carefully to ensure firm contact.
2. Gently, push the memory module down until latches on either side engage the
memory module to hold it in place.
3. Align two tabs on the edge of the memory slot cover with two notches on the
memory slot, and seat the memory slot cover.
4. Secure the memory slot cover with one M2.5×4 black flat-head screw.
CAUTION: Do not install a memory module in slot B only. Use slot A prior to slot B.
Otherwise, the computer or the memory may be damaged.
Satellite 1400/2400 Maintenance Manual (960-364/365)
4 Replacement Procedures
4-21