4.13 Display Mask
4.13 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-27.
1. Remove the following 4 seals on the display module in that order:
- Two black seals on the bottom
- Two black seals on the top
2. Remove the following 4 screws on the display module, in that order:
- Two M2.5x5 black flat head screws on the top
- Two M2.5x5 black flat head screws on bottom
3. Release the following 24 latches on the display mask, in that order:
- Nine bottom latches
- Five latches on each of the left and right sides
- Ten top latches
Seal
Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Downloaded from LpManual.com Manuals
M2 5x5 black flat head screw
M2 5x5 black flat head screw
.
Display mask
Figure 4-27 Removing the display mask
4 Replacement Procedures
.
Seal
Latch
4-45