4 Replacement Procedures
10. Lift the PCB-ASSY off the backlight unit as shown below.
11. Remove all double-sided tape from the back of the cell.
CAUTION:
1. The cell is attached to the frame with double-sided tape at one point.
Be careful not to damage the cell when you remove it.
2. Do not lift up the opaque tape on the left and right sides of the cell.
4-196
Figure 4-170 Removing the PCB-ASSY cell
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4.38 TFT FL (Model 15.0 SXGA Toshiba)