4.24 Fl Inverter Board
4
4.24 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, follow the steps below and refer to figure 4-57.
1. Remove one M2×4 flat-head screw securing the FL inverter board.
2. Rotate out the FL inverter board and disconnect the FL cable from CN1 on the FL
inverter board.
3. Disconnect the HV cable from CN2 on the FL inverter board.
4. Remove the FL inverter board.
Figure 4-57 Removing one screw from FL inverter board (15.0" Model)
Satellite 1400/2400 Maintenance Manual (960-364/365)
FL Inverter board
FL cable
4 Replacement Procedures
M2×4 flat-head screw
CN2
CN1
HV cable
4-83