Installing The Touch Pad - Toshiba Satellite 1400 Series Maintenance Manual

4 Replacement Procedures
4. Disconnect the touch pad SUMI card from CN1 on the touch pad, if necessary.
CN1
Figure 4-29

Installing the Touch Pad

To install the touch pad, follow the steps below and refer to figures 4-28 and 4-29.
1. Connect the touch pad SUMI card to CN1 on the touch pad, if necessary.
2. Seat the touch pad.
3. Secure the touch pad with one M2×5 thin silver flat-head screw.
4. Connect the touch pad SUMI card to PJ2004 on the system board.
4-46
Touch pad SUMI card
Removing the touch pad SUMI card
Satellite1400/2400 Maintenance Manual (960-364/365)
4.11 Touch Pad
Touch pad