Toshiba Satellite 1400 Series Maintenance Manual page 181

3.23 SETUP
13. Drives I/O
This option controls the setting for the hard disk drive and ATA card.
(a) Setting for Hard Disk Drive (Built-in HDD)
Primary IDE (1F0H/IRQ14)
No Drive
(b) When an ATA card is installed in IN13h, the sub window below is displayed.
Built-in HDD
ATA Card
14. Floppy Disk I/O
This option displays the address, interrupt request level and DMA channel settings
for the FDD. It is for information only and cannot be changed.
Floppy Disk = (3F2H/IRQ6/CH2)
Satellite 1400/2400 Maintenance Manual (960-364/365)
The built-in HDD is ready for use.
The built-in HDD is not installed.
DRIVES I/O
= Primary IDE (1F0H/IRQ14)
= Others (190H/IRQ)
3 Tests and Diagnostics
3-69