4.19 System Board
Installing the System Board
To install the system board, follow the steps below and refer to figures 4-42 and 4-43.
1. Seat the system board and RJ-45 jack.
2. Secure the following two stud screws:
• One M2.5×6 stud screw
• One M2.5×14 stud screw
3. Secure the system board with three M2.5×6 black flat-head screws.
Satellite 1400/2400 Maintenance Manual (960-364/365)
4 Replacement Procedures
4-67