4 Replacement Procedures
4. Remove four screws from two sides of the LCD module.
Screws
5. Turn the LCD module right side up.
6. Release two latches on the lamp side of the top frame.
4-114
Loosen the screws with 0.1078N⋅m (1.1kgf⋅cm) of torque.
Figure 4-86 Removing the screws
Latches
Figure 4-87 Releasing two latches
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4.30 TFT FL (Model 14.1 Sharp)
Screws