4 Replacement Procedures
Removing the RTC Battery
To remove the RTC battery, follow the steps below and refer to figure 4-33.
1. Disconnect the RTC battery cable from PJ9999 on the sound board.
2. Lift out the RTC battery.
Sound SUMI card
PJ9999
Installing the RTC Battery
To install the RTC battery, follow the steps below and refer to figure 4-33.
1. Seat the RTC battery.
2. Connect the RTC battery cable to PJ9999 on the sound board.
3. Make sure the RTC cable is under the sound SUMI card.
4-52
Figure 4-33 Removing the RTC battery
Satellite1400/2400 Maintenance Manual (960-364/365)
4.14 RTC Battery
RTC battery