Toshiba Satellite 1400 Series Maintenance Manual page 408

4 Replacement Procedures
7. Fit the X-PCB side of the cell into three latches on the frame as shown below.
8. Secure the latches on the sides.
9. Seat the FL side of the cell into the frame as shown below.
CAUTION: 1. Be careful not to damage the cable or the tab.
2. Make sure five latches are secured, three along the back and one on
each side.
4-200
Figure 4-174 Installing the frame
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4.38 TFT FL (Model 15.0 SXGA Toshiba)