4 Replacement Procedures
Installing the Display Mask
To install the display mask, follow the steps below and refer to figures 4-55 and 4-56.
1. Place the display mask in position, and fasten the 21 latches in the following order:
• Six latches on the top
• Five latches each on the right and left sides
• Five latches on the bottom.
2. Secure the display mask with two M2.5×6 flat-head screws.
NOTE: Hold the display by the back with your hand while tightening the screws.
3. Set two mask seals back on the screws.
4-82
Satellite 1400/2400 Maintenance Manual (960-364/365)
4.23 Display Mask