4.11 Touch Pad
4.11 Touch Pad
Removing the Touch Pad
To remove the touch pad, follow the steps below and refer to figures 4-28 and 4-29.
1. Disconnect the touch pad SUMI card from PJ2004 on the system board.
2. Remove one M2×5 thin silver flat-head screw securing the touch pad.
3. Lift out the touch pad.
PJ2004
Satellite1400/2400 Maintenance Manual (960-364/365)
Touch pad SUMI card
Figure 4-28
Removing the touch pad board
4 Replacement Procedures
M2×5 thin silver flat-head screw
Touch pad
4-45