Removing The Display Mask - Toshiba Tecra A5 Maintenance Manual

4 Replacement Procedures
4.21 Display Mask

Removing the Display Mask

To remove the display mask, first remove the display assembly as described earlier, and then
follow the steps below:
1. Remove four M2.5x6 screws securing the display mask to the LCD module.
2. Carefully insert your fingers between the display mask and the LCD panel, and pry open the
snaps. Start with the four snaps at the top of the display mask. Continue unsnapping the
display mask along the two sides and the bottom edge to remove the display mask.
[CONFIDENTIAL]
4-62
Figure 4-70 Removing the display mask screws
Figure 4-71 Removing the display mask
Tecra A5 Series Maintenance Manual