4.34 TFT FL (Model 15.0 LG.Philips)
Installing the TFT FL (Model 15.0 LG.PHILIPS)
To install the TFT FL (Model 15.0 LG.PHILIPS), follow the steps below and refer to figures
4-128 to 4-131.
1. Connecting of Lamp Ass'y with Double Tape (Lamp housing fixing)
2. Connecting of Lamp Ass'y with Mold frame and Connecting Low voltage wire with
Mold frame. Pressure or stress should not be given on wire during this process.
3. Connecting of Cover bottom (L) with Double Tape (Grounding)
4. Assembly of Cover bottom (L) and Screw. Maximum value of torque with Screw
should be below 2.0kgf.cm
5. Assembly of Sheets and Light guide. No penetration of foreign body is indispensable
with no scratch on the surface. Of each Sheet and Light guide.
6. Assembly of Tape adhesive and Mold Clip used for Sheets fixing
7. Assembly of Board Ass'y . Pressure or stress should not be given on PCB and TCP
Figure 4-128 Assembly of Double tape, Lamp Ass'y, Cover bottom, Sheets, guide, Tape
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
Adhesive and Board Ass'y.
4 Replacement Procedures
4-155