4 Replacement Procedures
12. Disassembly of Board Ass'y. This process should be made in Clean room with no
scratch nor particle on Polarizer and B/L Ass'y.
13. Disassembly of Tape Pad used for Sheets fixing (3Point).
14. Disassembly of Sheets and Light guide. No penetration of foreign body is
indispensable with no scratch on the surface of each Sheets.
15. Disassembly of Screw and Cover bottom (B) Maximum value of torque with Screw
should be below 2.0kg.
16. Disconnecting of Low voltage wire from Mold frame and Disassembly of Lamp
Ass'y from Mold frame. No pressure or stress should be given on this wire. Glue or
foreign body of double tape should not be attached in Mold frame.
Figure 4-71 Disassembly of Board Ass'y, Pad, Sheets, guide, Cover bottom and Lamp Ass'y
4-98
4.28 TFT FL (Model 14.1 LG.Philips)
Satellite 1400/2400 Series Maintenance Manual (960-364/365)