Tft Fl (Model 14.1 Lg.philips); Removing The Tft Fl (Model 14.1 Lg.philips) - Toshiba Satellite 1400 Series Maintenance Manual

4.28 TFT FL (Model 14.1 LG.Philips)

4

4.28 TFT FL (Model 14.1 LG.Philips)

CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to
avoid contaminating or damaging the LCD panel. Be careful not to let dust or other
foreign matter into the module.

Removing the TFT FL (Model 14.1 LG.Philips)

To remove the TFT FL (Model 14.1 LG.Philips), follow the steps below and refer to figures
4-68 to 4-71.
1. Disassembly of Tape adhesive used for B/L Wire fixing. Pressure or stress should not
be given on B/L Wire.
2. Disassembly of Tape adhesive (Yupo paper) used for Top case fixing
3. Disassembly of Cover shield (C) Pressure or stress should not be given on control
PCB. Usage of gloves with anti-electric discharge coating is recommended. To
eliminate possible damage on circuits occurred by ESC.
4. Disassembly of Cover shield (G) Pressure or stress should not be given on Gate TCP.
5. Disassembly of Tape adhesive used for Top case fixing. Pressure or stress should not
be given on Top case during this process
Figure 4-68 Disassembly of outside tape and cover shield
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4 Replacement Procedures
4-95