Toshiba Satellite 1400 Series Maintenance Manual page 185

3.24 Wireless LAN Test Program
When the machine has passed the test, "OK" message will appear in the test machine.
Then press Enter in the target machine; the "OK" message will appear also in the target
machine.
Press Enter to return to the main menu.
Receive test
In receive test reverse the procedures of the transmit test. To prepare the tester machine for
the Wireless LAN test program, insert a floppy disk containing the test program into the
tester machine and turn on the tester machine. The Wireless LAN test menu will appear.
Press 1 to select the test and press Enter. The following message will appear:
############################################################################
##### Satellite 1400/2400 Wireless LAN sub system repair test
############################################################################
*
* 1 ............
* 2 ............
*
* 0 ............
*
****************************************************************************
*
.... Press test number[1-2,0] ?1
======== RESPONDER SET ==========
ORiWL.EXE Rev.03
Initializing...
[[[ Trnsmit-Receive Test ]]]
MAC adress : XXXXXXXXXXXX
Ad-hoc mode
SS ID : PHN Test
Channel : 10
Tx ratio : 2 Mbps
_ PASS : 134
Satellite 1400/2400 Maintenance Manual (960-364/365)
Transmit & Receive test [Responder]
MAC Address test [Mini-PCI Wireless LAN]
Transmit & Receive test [Initiator]
Copyright (C) Toshiba Corporation, 2000, 2001
ERROR : 0
3 Tests and Diagnostics
VX.XX ####
*
*
*
*
*
*
3-73